Introduction
If the back glass is broken on your Huawei P20 Pro, you must replace this back glass which serves as a battery cover.
Tools
Parts
-
-
Gently but firmly insert a thin iSesamo tool about an inch between the broken back glass and the frame.
-
Slice all the way around the phone's edges to cut all of the adhesive.
-
-
-
Open the phone like a book and set the rear glass assembly aside.
-
Disconnect the fingerprint sensor.
-
Put down some 4 mm Tesa tape to act as replacement adhesive before reassembling your device.
-
Remove the fingerprint sensor from the broken/scratched back glass and reconnect the fingerprint sensor pad to your new back glass before closing the device.
-
-
-
Apply your new back glass assembly onto your phone. Apply some light force onto the back of the phone so that the adhesive sets.
-
Congratulations! You have replaced the back glass of your Huawei P20. Clean with a microfiber cloth for a perfect finish without scratches or fingerprints.
4 comments
Would the phone still be waterproof after?
No the phone is no more waterproof. It’s mitigated by the fact that after a few month your phone’s water protection is probably already compromised du to wear.
David S. -
How much and where can i replace mine?
ou trouver les differents composants a acheter pour realiser cette reparation?
renzo11 -