Huawei Mate 8 Back Cover Replacement

Written By: Dominik Schnabelrauch
  • Comments: 2
Huawei Mate 8 Back Cover Replacement

Difficulty

Easy

Steps

4

Time Required

15 minutes

Introduction

Use this guide to replace the back cover of your Huawei Mate 8 smartphone.

  1. FPx6tr1SmACZCQLl
    FPx6tr1SmACZCQLl
    nV32foKH1fC3wQpp

    • Switch off your phone and remove the SIM card tray.

  2. MoPkyf5rJ1B6BDgK

    • Remove the Torx T2 screws from the bottom of the phone

  3. 2AIKFEMfSFQObbBo
    2AIKFEMfSFQObbBo
    GEZbwKnoJkZJmYmu

    • Use an iSclack or a suction handle in the bottom area of your phone to separate the display unit from the rear panel.

  4. nUkTUM4bAdfaScSX
    nUkTUM4bAdfaScSX
    j5FJXOAmFYNNasFl
    jHXPyaXbBMkd66un

    • Use an opening pick to fully separate the clips, releasing the phone.

    • Do not fully remove the rear case. The fingerprint sensor cable is still connected to the back cover.

    • Open the phone like a book from the SIM tray side.

    • Use a spudger, to disconnect the fingerprint sensor cable.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Dominik Schnabelrauch

Member since: 23/11/16

224647 Reputation

2 comments

Question: If for some reason I accidentally cut the flex cable of the fingerprint sensor, can I replace the part? or it is like TouchID?

[deleted] -

I agree, easy if if you own this suction device and know WTF a spudger is. Otherwise, what? :/

404cameljockey -