How to load HP Deskjet 6122 paper

Written By: Joe
  • Comments: 0
How to load HP Deskjet 6122 paper

Difficulty

Moderate

Steps

6

Time Required

No estimate

Introduction

This guide will walk you through how to change the paper and common problems and solutions associated with being low on paper.

  1. xedJrI6Ar4tbaqni

    • Open the paper tray to see if it is empty.

  2. EnVZjhTYs6pAyYHf

    • If the paper tray is empty, add paper to the tray.

    • If there is already paper in the tray, realign the paper so that it fits in the gears, and can feed through properly.

  3. HaFCKPQMkBKBawWY

    • Ensure that all paper is in the correct tray.

    • The correct tray is on the upper deck of the printer.

  4. qPK1wtsMAjLlDyOG

    • Run the printer to verify it now prints.

    • If the paper still does not run through the printer, inspect the paper tray again.

  5. HqMTNt6aqPwBC43F

    • Remove any paper that looks to be overloading the tray feeder.

    • Sometimes there can be too much paper in the tray, preventing it from working properly.

  6. gb2ubBqtWpLHcvUe

    • Try to print one last time. If it still fails, consider consulting a page to update drivers.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Joe

Member since: 14/10/11

1 Reputation

0 comments