Introduction

Follow this guide to remove the stand on a PlayStation 5.

Before you begin, completely power down and unplug all cables from your console. Remember to follow general electrostatic discharge (ESD) safety procedures while repairing the console.

  1. tccurcEsCV2Jem41
    • If your PlayStation 5 is in its vertical orientation, flip it upside down so the stand is facing up.

    • If your PlayStation 5 is in its horizontal orientation, skip to Step 6.

    • Work on a flat surface to prevent your PlayStation from falling over.

    • Use a coin or a flathead screwdriver to remove the 26.5 mm-long stand screw.

  2. GTbQeM3BQhiOdLSH
    GTbQeM3BQhiOdLSH
    pPvQrFR3QxJcona3
    • Lift straight up to remove the stand.

  3. 5ON3Z62eTgwwefAh
    5ON3Z62eTgwwefAh
    N2e3QE2E1XNbJaTK
    • Insert the screw into the cubby on the bottom of the stand.

  4. c5wyLQEXQVvdxnMV
    c5wyLQEXQVvdxnMV
    TFfMjCrwb3lo5jM1
    vPxMbWYwZN4wgHAa
    • Use a pair of tweezers or your fingernail to remove the cap from the cubby.

    • Use your finger to press the cap into the screw hole.

  5. xXLuv4RjbvQuoOV2
    xXLuv4RjbvQuoOV2
    fgJrA5NsMKQaFaJq
    UTxfr1FuAInSlfD5
    • Twist the stand counterclockwise to close the cubby.

  6. CNkg1VhN2eJYqVaj
    CNkg1VhN2eJYqVaj
    hgKZF2u42g1v2Zfx
    • If your PlayStation 5 is in its horizontal orientation, rest it on its face with the charging port facing up.

    • Lift the stand straight up to remove it.

    Do you guys sell the stand

    Corey Lewis -

    Steps 1 through 6 are just about removing the stand, correct? Storing the screw and all that is just about being neat and tidy?

    tofu -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our PlayStation 5 Answers community for help.

Robert Boyd

Member since: 01/02/21

28660 Reputation

0 comments