How to Remove the Rear Panel in Your LG WM3050CW Washing Machine

Written By: Bill Gilbert
  • Comments: 0
How to Remove the Rear Panel in Your LG WM3050CW Washing Machine

Difficulty

Moderate

Steps

4

Time Required

5 - 10 minutes

Introduction

Use this guide to remove the rear panel in your LG WM3050CW Washing Machine.

Removing the rear panel gives you access to many internal components, such as the direct drive motor, dampers, and more.

  1. IWjgsUtZOIuShVqa
    IWjgsUtZOIuShVqa
    cmisDLhhQ1ZspJJT

    • Before you begin your repair, perform the following:

    • Turn off the main water supply

    • Unplug your washer

    • Disconnect all water connections at the rear of your washer

  2. MGkeqWjFFZXTPUJR
    MGkeqWjFFZXTPUJR
    WJMsGaONCN5DOo3O
    pADF2jHPWsJtSPvL

    • Use a Phillips driver to remove the four 10.7 mm‑long screws securing the rear panel.

  3. cNHkXfWZ4d6RkHMx
    cNHkXfWZ4d6RkHMx
    c1KVggZmkiqDvQgg
    qJQlpnMifyKDNXkm

    • Lift the rear panel upward to release its bottom clips.

    • Pull the rear panel away from the chassis to release the remaining clips.

  4. ONHN2leXXTAUVXHL

    • Remove the rear panel.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Ask our Answers community for help.

Author

Bill Gilbert

Member since: 30/06/22

35117 Reputation

0 comments