How to Open the Rocketfish RF-WHTIB-A Sender

Written By: Caitlin Charlton
  • Comments: 0
How to Open the Rocketfish RF-WHTIB-A Sender

Difficulty

Easy

Steps

3

Time Required

5 minutes

Introduction

Most problems with the Rocketfish RF-WHTIB-A sender require opening up the device. This guide will show users how to successfully open up their device.

  1. xCOVreeIJcO6yFWd

    • Remove the four rubber tabs from the bottom of the sender.

    • Pull hard to peel off the rubber tabs, as they are attached with adhesive.

  2. wFRTK4rHUVXybMci

    • Use a Phillips #1 screwdriver to unscrew the four 12 mm screws on the bottom of the device.

  3. mQiSMequeDKGj2AN
    mQiSMequeDKGj2AN
    b34njPBqEx5gkvAZ

    • Flip the device over and remove the top casing from the sender.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Caitlin Charlton

Member since: 23/03/15

756 Reputation

0 comments