How to Install the Self Repair Assistant App

Written By: Alex Diaz-Kokaisl

Comments: 5

How to Install the Self Repair Assistant App

Difficulty

Easy

Steps

Time Required

1 - 4 minutes

Introduction

This is a prerequisite-only guide! This guide is part of another procedure and is not meant to be used alone.

Follow this guide to install the Self Repair Assistant app. You can use the app to calibrate an optical fingerprint sensor or to reset the battery cycle count.

Step 1

Download the Self Repair Assistant app (2.0.12)here.
You may be prompted with a "File might be harmful" warning. If so, select "Download anyway."
Open the "My Files" app.
Navigate to the "Installation files" tab on the left side of the screen.

The Self Repair Assistant is now working on one ui 6.1

Jayson Chua -

Je trouve mas l'application

Oussama Reddaf -

Make sure to set your phone date to year 2022 before using this app version. If you don't, it will not work and ask you to download the latest version.

Do not use the latest version of this app as it will ask for Samsung-made battery serial number (really Samsung. copying Apple for this is anti-consumer).

Peter Chang - 21/09/24

Step 2

Select the app on the right side of the screen.
If the app doesn't show up on this panel, skip to the next step.
Select "Install" to confirm the app's installation.
Skip the next two steps.

It says model not supported

kayceegovender24 -

Step 3

If your app didn't show up on the "Installation files" tab, follow the next two steps to rename the file.
Navigate to the "Downloads" tab on the left side of the screen.
Long press the download file until an orange checkmark appears to the left of it.
Navigate to the bottom of the screen and select the "More" option.