Introduction

Everyone knows how annoying controller drag is if you want repair that you've come to the right place.

    • Remove battery and side handle cases

    • Unscrew the five TR8 torx security srews one is located under the sticker in the battery compartment and two on each handle

    • Remove the front case and the joystick covers unscrew the two TR7 screws holding the case down

    • Carefully unclip the side's of the the joystick and remove any obstructions for cleaning inside

    • Finally do it reverse

Conclusion

To reassemble your device, follow these instructions in reverse order.

Wolf045 fixit

Member since: 19/10/23

172 Reputation

0 comments