How to Cover a Peeling Car Door Panel in a 2002 Honda CR-V

Written By: Ana Ayala
  • Comments: 0
How to Cover a Peeling Car Door Panel in a 2002 Honda CR-V

Difficulty

Moderate

Steps

6

Time Required

35 minutes

Introduction

If your 2002 Honda CR-V car door panels have peeled, they require repairing. When exposed to excessive heat or after having your vehicle for a long period of time, you may experience peeling panels. When panels peel, your car may not look like it once did. Fortunately, car door panels can be fixed in just a few steps. It is important to use appropriate tools and techniques to ensure a proper and seamless repair.

  1. aYqq4DlwjsfKIAmc

    • Clean the adhesive on the door panel using a wet cloth.

  2. XFfiHCIf3ByCV2i2

    • Use a different clean rag and add acetone to clean the area.

  3. bFRUaUTTLTAwJOwO

    • Cut out your chosen fabric to size and leave plenty of room for the sides.

  4. EAXAMRwGmF2GOuvO
    EAXAMRwGmF2GOuvO
    flqhUWOSjDjSGYlg

    • Spray the entire panel with the adhesive.

    • Spay the adhesive carefully to avoid getting it on an area that you did not want.

  5. BaRNB5sjWQNRNWlW

    • Line up the fabric to the panel by starting in the center and pressing down gently.

  6. 1kEPAEJeVB2gKXeo
    1kEPAEJeVB2gKXeo
    GAsV2tOZ4EyCK1AX
    Ghagsf6uYianPdlW

    • Use an X-acto knife to push the fabric into the crevices.

    • Keep fingers clear of of the cutting area; blades are extremely sharp.

Conclusion

Your car door panels should now be done. If these is still any peeling of the fabric, you can add more adhesive glue and press down on the panel.

Author

Ana Ayala

Member since: 31/08/23

133 Reputation

0 comments