How to Apply New 5G mmWave Antenna Adhesive in Your Google Pixel Fold

Written By: Alex Diaz-Kokaisl
  • Comments: 0
How to Apply New 5G mmWave Antenna Adhesive in Your Google Pixel Fold

Difficulty

Moderate

Steps

3

Time Required

10 - 15 minutes

Introduction

This repair guide was authored by the iFixit staff and hasn’t been endorsed by Google. Learn more about our repair guides here.

Use this guide to replace the 5G mmWave antenna adhesive in your Google Pixel Fold following a repair.

Follow this guide to remove the 5G mmWave antenna, if you haven't done so already.

  1. dRFTaCoZo6MkyHxN
    dRFTaCoZo6MkyHxN
    TaaJ3EcLJvD3odmn
    UaLyLkSrKNMWUNu6

    • Look at the 5G mmWave antenna recess and note where the adhesive is located.

    • Your new adhesive doesn't have to align perfectly, but it should be close to the original locations.

    • Use a spudger and tweezers to remove any old adhesive.

  2. f1TTZLvdaHjniK2O
    f1TTZLvdaHjniK2O
    ZkQrsR1DYSMD1eoI
    RphTbI1FjHsJAwwT

    • Peel off the new adhesive strips from their clear liners.

    • Apply the adhesive strips to their respective spots on the frame.

    • Use a spudger, or your fingers, to press down the adhesive and ensure a good seal.

  3. XTGUaARU1YY4niFe
    XTGUaARU1YY4niFe
    ymVKYyNVf3KOQURf
    UsoBIuS1FrpksnMC

    • Grip the pull tabs and peel off the blue liners to expose the adhesive.

    • Insert the 5G mmWave antenna in its recess in the frame.

    • Press down on the antenna to ensure a good seal in the adhesive.

Conclusion

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Google Pixel Fold Answers Community for help.

Author

Alex Diaz-Kokaisl

Member since: 16/01/22

151892 Reputation

0 comments