Gateway SA1 Disk Drive Replacement

Written By: Diego Carteno
  • Comments: 0
Gateway SA1 Disk Drive Replacement

Difficulty

Easy

Steps

5

Time Required

No estimate

Introduction

This Guide will help you replace a Gateway Disk Drive.

  1. S6lEYvUrYwibbAWp

    • Move the latch to the right of the battery to unlock.

  2. KjtYYqwZCqFtLOIo

    • Slide the latch on the left directly below the battery to unlock and pull out the battery as shown.

    • The latch must be held in position to remove the battery.

  3. v61G6v6HnVBcAtXS

    • Unscrew the marked 5.9 mm Philips screw.

  4. LD3fZrFDuOVTHM4s

    • Use the spudger to pry out the Disk dive.

  5. pbZPvSPF23KIvdCt

    • The disk drive should easily detach and can now be replaced.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Diego Carteno

Member since: 15/04/10

273 Reputation

0 comments