Garmin Nüvi 370 Battery Replacement

Written By: poopspeedstream
  • Comments: 0
Garmin Nüvi 370 Battery Replacement

Difficulty

Moderate

Steps

6

Time Required

No estimate

Introduction

In this guide the repairer replaces the battery of the device by disassembling it to expose the motherboard, which in turn allows access to the battery.

Prerequisite Guide:

Disassembling Garmin Nuvi 370 Into Core Components

Tools Used:

  • Fine Point Tweezers
  • Spudger

Estimated Duration: 10 minutes

  1. fJxUw1M2ObXZB4U1

    • After following the instructions in the main dis-assembly guide, you should have the screen detached from the motherboard.

  2. FOXYeFfebFWfgPyt
    FOXYeFfebFWfgPyt
    irYFfLZFJafu4sc1
    GdFoadXeQLkUXsmV

    • Use the tweezers or the spudger to lift the tan latch off the ribbon cable (ZIF connector)and gently pull out the ZIF connector and cable from underneath the opened latch.

  3. xAOLrJSrHD1GUDgl
    xAOLrJSrHD1GUDgl
    MuEiBq6o5lY6yUAA

    • The motherboard will now freely separate from the back casing; lay it flat next to the housing.

  4. tEtZCSadScU35hWW
    tEtZCSadScU35hWW
    BLLOkyohESVIHpph

    • Disconnect the speaker and battery from their terminals on the motherboard. This should disconnect the motherboard completely from the back panel.

    • It is recommended that you use tweezers or the spudger for precision.

  5. XWFNpXRjhdmKctPx
    XWFNpXRjhdmKctPx
    GK25IIEYlGlLZCET

    • Using the flat edge of the spudger from above, gently pry the battery away from the plastic.

  6. TXcbABWvN5rHXYvB

    • The battery should now be completely separated from the other components.

    • Insert new, functional battery.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

poopspeedstream

Member since: 19/04/13

1 Reputation

0 comments