Introduction
-
-
Removing 10x Case screws
-
Use a PH#1 driver or bit to remove the 9, 7.5mm, M2 screws
-
Remove, 4, PH#1, 4.5mm, m2 screws.
-
-
-
insert your jimmy tool vertically in the gap between the side a buttom pannel
-
Use a gentle twisting pressure to create a gap for a plastic opening pick or spudger
-
pry the borders of the back pannel
-
You can gently lift the bottom-most section to assist in separation
-
Conclusion
Guide written by Daniel Layman, CEO & co-owner of Advanced Device Repair, LLC
