Fujifilm Finepix S1800 Back Cover Assembly Replacement

Written By: Ryan Rockford
  • Comments: 0
Fujifilm Finepix S1800 Back Cover Assembly Replacement

Difficulty

Easy

Steps

4

Time Required

10 minutes

Introduction

Is your back case cover scratched on your Fujifilm Finepix S1800? It may be time to replace the cover. This guide will walk you through each step on replacing the back case cover.

  1. V11CkWYR3HUROEhG

    • Unscrew the four 4mm screws on the left-hand side of the camera with the JIS #1 screwdriver.

  2. TMsLQEvHtpTmFiYl

    • Unscrew the four 4mm screws on the right-hand side of the camera with the JIS #1 screwdriver.

  3. m2qRLxeKBsYSXVFe

    • Unscrew the three 4mm screws on the bottom of the camera with the JIS #1 screwdriver.

  4. TjkM3xTrySaQxV1S
    TjkM3xTrySaQxV1S
    cBlZUjiRreZnHfGL

    • Take the plastic opening tool and place it in the space between the top of the screen and the top of the camera.

    • The cover will pop out.

    • You may have to work the back cover from different sides to get it to pop off.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Ryan Rockford

Member since: 15/02/17

618 Reputation

0 comments