Introduction

When a camera's batteries loose their charge, they either need to be replaced or recharged. Also, whenever you want to service the camera, it's a good practice to remove the batteries before going any further with your repairs.

  1. Tww2KLZG5q55y5uv
    • Make sure that the camera is powered off before continuing.

    • Rotate the camera so that the label on the base of the camera is facing up.

    • On the battery compartment door, there is a slider that says "open". Slide it down and push the door to the right to release the door.

  2. NWnbm6qTL6wW3ax3
    NWnbm6qTL6wW3ax3
    ZiaVLgHMYI2EFtXu
    WkpSsx2jKjsdJePP
    • Remove all four batteries and set them aside.

    • When replacing the batteries, be sure to note the markings on the face of the battery compartment. These markings let you know which side of the battery ("+" or "-") needs to be facing up in each slot.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Stephen Calabrese

Member since: 17/02/17

584 Reputation

0 comments