Introduction
If the battery of your Fossil Q Venture Gen 3 smartwatch has come to the end of its life, use this guide to replace the battery.
-
-
Once the band is removed, then it is necessary take a screwdriver and remove the 4 screws holding the backplate in place.
-
-
-
Once free, the inside of the watch will be exposed and you can disconnect all the golden connections (battery, display, etc) and carefully loosen the battery housing from the shell
-
-
-
When the board is removed, the battery will be stuck in place with an adhesive inside the black plastic housing. Prying the battery out gently will remove it from the board.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
