Flash and re-install the firmware

Written By: Formica Fusca
  • Comments: 0
Flash and re-install the firmware

Difficulty

Very easy

Steps

6

Time Required

2 - 5 minutes

Introduction

Guide on how to re-install the firmware, if it became corrupted and wheel is not powering on.

    • Press on the Windows button and type "Firmware Update" into the search.

    • Unplug T248 from USB port.

    • Keep it plugged-in to power

  4. rhQbaCFJrnndBnMf

    • Press and hold MODE button

  5. OSCKEcS4mEXcwpwp

    • Keep holding the MODE button and connect it to USB port

    • Once connected, wait a few seconds and let go of the button

    • Your device should show up in Firmware Updater

    • Press OK on the Firmware Updater and wait for update to complete

Author

Formica Fusca

Member since: 01/08/24

2587 Reputation

0 comments