Fast Fix 2006 Honda CR-V Key Fob Buttons Replacement

Written By: Spencer Greer
  • Comments: 3
Fast Fix 2006 Honda CR-V Key Fob Buttons Replacement

Difficulty

Very easy

Steps

7

Time Required

No estimate

Introduction

This fast fix is to fix the buttons on a 2006 Honda Cr-V key fob. It is a very simple and easy fix. You will only need one tool and the replacement part.

  1. X5TJExAji4GvWOC1

    • You will need to take the key off the ring.

  2. RscrAm5PRNvFRr6m

    • The second step is to take out the little screw on the back side of the key.

  3. Pe3se4kR5bFcVoDo

    • Unclip the back part of your key.

    • This part is super fragile.

  4. PvSDn6hK6N3TZtyR

    • You will push the buttons from the front side to have the middle piece fall out.

  5. DShRg1jbCByGMptl
    DShRg1jbCByGMptl
    4ElLDFwFWgeFDhcv

    • Then you will unclip the middle part. There is one clip on each side of this piece. They are super fragile and can break easily.

  6. FHXagghEZZWPXUlX
    FHXagghEZZWPXUlX
    Cw4UlJZBbHCU3ItA

    • Then push the buttons from the front side to push out a rubber insert.

  7. LGCexcFrKHKOKIVh

    • Then peel out the mother chip and replace your rubber insert.

    The 2005 key has plastic buttons. I wonder why they changed to soft buttons. That would be less durable.

    kctipton -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Spencer Greer

Member since: 11/04/19

193 Reputation

2 comments

How do you remove the key from broken fob and put in new fob so you don’t have to incur the cost of cutting new key?

Me Me -

Just open the fob, like in this tutorial. The key is just a piece of metal.

Then place the key in a new fob (or replace only the fob plastic case for a cheaper solution).

Brendan -