Farberware FSTO100 Power Supply Replacement

Written By: Tony Wang
  • Comments: 0
Farberware FSTO100 Power Supply Replacement

Difficulty

Moderate

Steps

4

Time Required

20 minutes

Introduction

Use this guide to repair the power supply with a Phillips head screwdriver, a wrench, and pliers. These tools will help secure the screw holding the wire.

  1. nE4SFRPe1VZml6Px

    • Make sure the toaster is unplugged.

    • First, to remove the plastic bracket, turn toaster oven on its side.

  2. UIRQT14ifI5BtZoa

    • Use Phillips head screwdriver and wrench to remove screw and nut securing the plastic bracket.

  3. H3fTF4GRrrBpsQE4

    • Use Phillips head screwdriver and pliers to remove screw and nut securing transformer.

  4. JU4wlWFl1cNAIqJR

    • If the wire gets pulled out of the transformer, reinsert it.

    • Use a small flathead screwdriver to secure the screw that holds the wire in place.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Tony Wang

Member since: 05/10/12

112 Reputation

0 comments