Introduction
Applicable to all engines (H4D and H4Bt).
Replace every: 20,000km or year. It should be replaced earlier if driving in dusty environments.
A clogged engine air filter may impact fuel economy: it will create more resistance and therefore, increase the pumping losses.
Note: recommendations are given according to the French RTA's (Revue Technique Automobile) maintenance plan, matching Smart 453's maintenance plan in this case.
Parts
-
-
Unscrew the 6 T50 screws by hand or using a wrench and a socket.
-
Lift and put aside the engine hood.
-
-
-
Unscrew the 2 Torx T25 screws.
-
Disglog the air filter lig by slightly pushing/pulling it forward then lifting it.
-
-
-
Extract the used air filter.
-
Dust off the air box from any debris residing in it.
-
Install the new air filter.
-
-
-
Replace the lid by sliding the two notches.
-
Screw back the two T25 Torx screws while maintaining a slight pression on the lid.
-
Congratulations ! You replaced your engine air filter