Introduction
Many have said it is difficult to fix a charge port for a few reasons:
Tiny pins.
Lack of tools
Destroying pads
Here is a step by step that should work with most devices to help make the job easier.
-
-
Disassemble to get to motherboard of device, wrap with kapton tape to avoid damaging any other components. Take heatgun and heat old port
-
-
-
While holding the port with tweezers or other holding tools, heat the port evenly until the connections melt.
-
Lift the charging port from the pads.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
One comment
Is this the complete guide?
This seriously lacks depth and detail.