Creative Zen Vision W Front Cover Replacement

Written By: Gabriele Pregadio
  • Comments: 1
Creative Zen Vision W Front Cover Replacement

Difficulty

Easy

Steps

2

Time Required

5 minutes

Introduction

If your Creative Zen Vision W (model 70PF201000009) has a damaged front cover that needs to be replaced, follow this guide. The front cover for this device keeps the button pad and display in place while providing protection to other internal components.

In Step 2, use the original button pad with the replacement cover.


  1. 3o4iYWIpwQAl2R5l
    3o4iYWIpwQAl2R5l
    K5JDLCM1MPSRtBHW

    • Remove the two screws (2.5 mm) on the top and bottom of the device using a Phillips #0 screwdriver.

  2. 6PN3GkBQbTet53EU
    6PN3GkBQbTet53EU
    gk1b4TCUiGuFVc3a
    UXVAcvMNrqCN66SD

    • Run the spudger along the cover and pry.

    • Do this gently to preserve the screen

    • The button pad may fall off when the cover is removed.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Gabriele Pregadio

Member since: 17/04/13

1 Reputation

One comment

Fantastic but does anyone know where I can get this part?

VegetaFlex4Fitness -