Creality Ender 3 Pro and V2 32 Bit BL Touch Install Replacement

Written By: Tiny Machines 3D
  • Comments: 0
Creality Ender 3 Pro and V2 32 Bit BL Touch Install Replacement

Difficulty

Moderate

Steps

9

Time Required

No estimate

Introduction

  1. mcP5sNsTLMTTpgmH
    mcP5sNsTLMTTpgmH
    fcRNYPxDNaiB3rxW
    uCVL1d425r3ieaaX

    • Attach the probe to mount with provided M3x 6 screws, positioning the probe with the connection towards the nozzle.

    • Plug in the connection like shown.

    • Final mounting should look like this.

    • Use provided cable ties and attach harness in 3 places. Do not over tighten the cable ties.

    • The probe mounting is a different between the Ender 3 V2 and Ender 3 / Pro but the bulk of this guide applies to all the 32 bit Ender 3 Variants.

  2. g1ATUKlAOvRBt6WS
    g1ATUKlAOvRBt6WS
    opwppGIHVVxZEdLy
    vuw4p44olGxYRJKG

    • See our Detailed Wiring Diagram

    • The original Z limit switch connection will not be used. Leave unplugged.

    • Use a provided cable tie to attach the BL Touch wires to the rest of the wiring bundle.

    • Assemble the green connector. Wiring must match through the connection but wiring order is not important to start. To be safe, assemble like in the picture.

    • Reinstall the bottom cover, making sure to plug your fan back in.

  3. EHccBJuhguDgGTbG
    EHccBJuhguDgGTbG
    lOfCxeLipVyUQw5b
    pVX4A6nas3OQ2rLQ

    • Double check wiring before plugging the green connectors in or powering on the machine! If you mixup wiring, damage can occur.

    • Firmware is different for the Ender 3 / Pro , Ender 3 V2. Please contact us with your board type and machine for firmware and screen files.

  4. 1rXBnZKKAuqUmJBq
    1rXBnZKKAuqUmJBq
    JUVVhEHtJ1xZPqPR
    laSYVrNgaCu2UhhV

    • Insert wisdom here.

  5. 3sCFIhWAEQyCu2SM
    3sCFIhWAEQyCu2SM
    3YEAGIFywAQwqGpO
    OGdvjXrSCCOLifTc

    • Insert wisdom here.

  6. UMUOKhLTdMvg513y
    UMUOKhLTdMvg513y
    ctkZqZSWBXBam3G4
    Bicb12qcDKspZTHP

    • Insert wisdom here.

  7. WXOnOrYiTUZWPidr
    WXOnOrYiTUZWPidr
    Ip3MGAD2PmGt2hbt
    1Zhq1DZEcyZiqLUK

    • Insert wisdom here.

  8. EQ6FXMQuF2NpLdGw
    EQ6FXMQuF2NpLdGw
    WZnmRybYioKSiNQX
    VVceiXKoSM4yQ1J1

    • Insert wisdom here.

  9. 6GFDox5OJGjcWGt4
    6GFDox5OJGjcWGt4
    GDmWnMSZ2lRtRTvN

    • Insert wisdom here.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Tiny Machines 3D

Member since: 16/11/19

3009 Reputation

0 comments