Commodore 64 Opening the Case Prerequisite Guide

Written By: Silvanus Clarke
  • Comments: 2
Commodore 64 Opening the Case Prerequisite Guide

Difficulty

Moderate

Steps

2

Time Required

1 minute

Introduction

The Commodore 64, also known as the C64, C-64, C= 64, or occasionally CBM 64 or VIC-64, is an 8-bit home computer introduced in January 1982 by Commodore International.

  1. hTQKhSEIXuTeobMx
    hTQKhSEIXuTeobMx
    XArRRoj5GSlHOVU1
    CWZVFKBPIdlcBgER

    • 1. Remove three 6.75mm ph2 screw heads from the casing

  2. FZosRpMYQtTTP6vx
    FZosRpMYQtTTP6vx
    fBemOm4g5hUsUWtJ

    • 2. Split the case of the C64 open by pulling up on the case towards you

    • Do not pull too hard that you break the clips.

    Good advice, but is there a reliable way of keeping the clips intact?

    coryengel -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Silvanus Clarke

Member since: 26/09/14

656 Reputation

One comment

Is the Commodore 64x with the same screw?

anon -