Cirago M9030 Cover Replacement

Written By: Ryan Sutardji
  • Comments: 0
Cirago M9030 Cover Replacement

Difficulty

Easy

Steps

3

Time Required

3 - 5 minutes

Introduction

This is a replacement guide for the Cirago M9030 Cover. The following steps will guide you in the dismantling and rebuilding of the cover as well as a replacement.

  1. XQJaWKtAcGEObWkZ

    • Use a Phillips #00 screwdriver to unscrew the four 1.1mm long screws on each corner located at the top of the cover.

  2. VVfcJHSIa2lEDckt

    • Similar to the last step, flip the cover over and use a Phillips #00 screwdriver to unscrew the four 1.1mm long screws on each corner located at the bottom of the cover.

    • Remove the warranty sticker across the bottom.

  3. c2J6YKqA5AyPfD2j
    c2J6YKqA5AyPfD2j
    hIpIlRajTjYxrHXq

    • Gently take the cover apart using your hands separating the top and bottom.

    • The outer shell is expected to easily come apart.

Conclusion

In order to reassemble your device, follow these instructions in reverse order.

Author

Ryan Sutardji

Member since: 29/06/12

171 Reputation

0 comments