Car Seat Belt Stopper Replacement

Written By: Zhong Chu

Comments: 0

Difficulty

Easy

Steps

Time Required

5 - 15 minutes

Introduction

In most vehicles, a small stopper holds the seat belt buckle in place. Sometimes the stopper comes off or breaks, allowing the buckle to slide down. This simple guide demonstrates how to replace the seat belt stopper so you can drive safely without the inconvenience of the buckle sliding down after each use.

Tools

Step 1

Use a cloth to wipe away any debris from the area.

Step 2

Find the existing hole for the seat belt stopper or choose a different location that is better for you.
Separate the replacement stopper if it has come assembled.

Step 3

Before you begin, make sure that the seat belt buckle is pushed above the hole where you are installing the new seat belt stopper.
Push the side of the seat belt button with the needle or point into your desired location.
It may require a small amount of force.

Step 4

Take the other half of button stopper and slide it onto the pin on the other side of the belt.
Fasten the two parts of the button together and squeeze for a secure fit.
You may hear a "snap" or "click" when they are fastened together.