Bose Soundlink Flex Grille Replacement

Written By: Isaac
  • Comments: 0
Bose Soundlink Flex Grille Replacement

Difficulty

Moderate

Steps

3

Time Required

10 - 30 minutes

Introduction

A very easy component to replace on the Bose Soundlink Flex speaker is the grille. Reasons for replacing the grille may be that it's dirty and affecting the sound quality of the device, it may be broken, or you may just want a new color grille to change the look of the device. Follow the steps in this guide to easily replace the grille on your Bose Soundlink Flex.

  1. hSMmDFjtW3SIclrc

    • Use a heat gun to warm up the device.

    • This will allow for an easier removal of the grille and prevent damage to the device during the replacement. If you do not have access to a heat gun, a hair dryer works as well.

  2. GplQHpGbHQrpL2ai

    • Use an iFixit opening tool to pop off the eight clips on the grille.

    • Be patient and do not rush this process as you may otherwise damage the device.

  3. dAbDVIBTiXUSwIQB
    dAbDVIBTiXUSwIQB
    uDA4b4ylC3yN5Zm5

    • Once the clips have been released, the only thing holding the grille on is glue.

    • Apply minimal force and the grille should pop right off the device.

    • Reheat the device to warm up the glue if there is difficulty in removing.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Isaac

Member since: 30/10/23

205 Reputation

0 comments