Introduction
Tools
-
-
Remove the cover by lifting the notch towards the bottom of the phone. Use your fingernail to lift it up.
-
-
-
Remove these nine screws with a small phillips screwdriver. They are all the same size.
-
There is a small screw hidden under the warranty sticker. You may either remove or poke through it .
-
-
-
Use the pry tool to gently separate the panel from the frame, starting from the bottom left corner and continue along the edge of the phone.
-
*WARNING* by doing this, you will void the manufacturers warranty.
-
-
-
Continue using the pry tool around the back panel of the phone to separate both pieces.
-
Once you have gone around the entire frame, use both hands to pull it apart.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.