Introduction

This guide will show you how to access the insides of your Beboncool Pro Switch Controller by removing the back plate.

  1. SYDioBwU24BiPjdd
    • Place the controller down with the back facing up.

    • Remove the seven Phillips #00 screws from the back plate.

  2. SaUcBykIbKMyHT5T
    • Separate the back plate from the rest of the controller using an opening tool.

    • Detach the cable connecting the back plate to the rest of the controller.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jackson Boisvert

Member since: 15/10/19

206 Reputation

0 comments