Introduction
Use this guide to replace the spring in the clamp of your Beachwaver S1 Dual Voltage Ceramic Rotating Curling Iron. If the clamp is no longer functioning effectively, the spring may be damaged and require replacement.
Before starting this repair, ensure the curling iron is turned off and unplugged. If you’ve recently used the curling iron, allow it to cool completely to avoid the risk of burns.
-
-
Using a Phillips Screwdriver in the size 000, insert it into the hole that attaches the pin to the clamp to push the clamp out.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
