Introduction
Using a hex 2.0 driver, you will remove the top cover. using a pair of tweezers, you will then be able to remove and replace the Brck Motherboard.
Tools
-
-
Remove the four screws(4mm hex head) on the corners of the device with a Hex 2.0 Screwdriver.
-
-
-
Slightly lift the modem to reveal the brown ribbon connector and metal connection plate, located on the bottom of the modem.
-
-
-
Slowly lift the motherboard out from the device by lifting it from the end next to the ribbon connection.
-
Lift and pull out of place.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.