Introduction

If your touchpad is glitching or is not responding to you, here is a step-by-step guide showing how to replace the ASUS ROG Zephyrus M15 GU502L touchpad.

  1. ZhHAueOXtiQy4tiM
    ZhHAueOXtiQy4tiM
    pvOpVVMPwVBFvX45
    • Remove fifteen 10 mm screws from the bottom cover using a Phillips #0 screwdriver.

  2. eCCSdZja5mCGeywE
    eCCSdZja5mCGeywE
    BDbSBi1KTXSHPGSg
    • Use a plastic opening tool to separate the back cover from the laptop.

    • It is recommended that you separate the laptop cover from the side and run the tool along the edge of the cover to open it.

    • Be careful not to damage the cover when removing it from the laptop.

  3. ISE3h4h2KVNejnJ4
    • Remove six 4.8 mm screws that secure the battery using a Phillips #00 screwdriver.

  4. XUENvvnTbBrIbEFT
    XUENvvnTbBrIbEFT
    ydgk6nacBBj6c6G3
    • Disconnect the 8-pin battery that secures the battery to the motherboard.

    • Use the nylon tipped reverse tweezers to squeeze the edges, then pull out the connector.

  5. 1QWgseexOZDt5PV4
    • Remove the battery from the computer.

  6. oZOGPvKoxqsIhMSk
    • Remove the 3mm screws that secure the touchpad using a Phillips #0 screwdriver.

  7. NrT2wH1vJQrJinpV
    • Remove the touch pad from the casing.

    • Be cautious picking up the touch pad as it is light.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Yahir Donis

Member since: 07/09/23

339 Reputation

0 comments