Asus ROG Strix GL702VS Fan Replacement

Written By: Conor H Allen
  • Comments: 0
Asus ROG Strix GL702VS Fan Replacement

Difficulty

Moderate

Steps

7

Time Required

15 minutes - 1 hour

Introduction

This is a step by step guide for the removal of the Asus ROG Strix GL702VS cooling fans for replacement or repair. If you are experiencing overheating problems or loud fan noises and grinding, follow these steps to remove the fans for replacement, repair, or cleaning.

  1. AccQS1aclGbeS4id

    • Flip the computer so the bottom of the laptop is facing up.

  2. XE2EpV5SqCCtLbms

    • Remove the ten JIS #0 screws around the edge of the laptop.

    • The two bottom screws are slightly shorter

  3. eBhKoFA3WiPMAFPs
    eBhKoFA3WiPMAFPs
    L3CsUENLWIjwuUx4

    • Use a Jimmy to carefully free each side of the bottom casing.

  4. I2PxTdJniowWlQAr

    • Lift up the back casing from the computer.

    • You may hear clicking or snapping sounds. This is just the plastic clips coming loose.

  5. 6tRgMj3nLYCBISSZ
    6tRgMj3nLYCBISSZ
    3hDNOyhnoRfNbUks
    tTRMqHEqXcKQtPjs

    • Remove the four 4.8mm JIS #0 screws (two on each fan).

  6. Iqyukh16Ec6KygGl
    Iqyukh16Ec6KygGl
    SQECvMNWHNXiWEui
    xgVMqLPBrAcT14bF

    • Remove the fan's connector on the motherboard using a pair of tweezers.

    • Be gentle, as the small clips and wires can be easily damaged.

  7. 44wsBt6jPPArHVT3
    44wsBt6jPPArHVT3
    tNnmmPPAk2NsB3XT

    • Gently lift each fan up and out of position.

Conclusion

To reassemble your device, follow these instructions in reverse order.


Author

Conor H Allen

Member since: 16/09/19

622 Reputation

0 comments