Introduction
Use this guide to take off the back cover of your bq Aquaris M5.
Tools
-
-
Insert the tip of an iFixit opening tool between the back cover and the mid frame of the phone.
-
Slide the opening tool to the bottom of the phone, to snap out the plastic clips, connecting the back cover and mid frame.
-
-
-
Slide the opening tool back to the top of the phone, to disconnect all the clips on the edge.
-
Slide around the corner and along the top edge, to also disconnect these clips.
-
-
-
Grab the back cover by the loosened edge.
-
Gently bend and twist the flexible back cover a bit to disconnect the remaining clips.
-
Take off the back cover.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
