Introduction
Use this guide to replace the Motherboard in Alcatel Jitterbug Smart.
It's also an useful guide to help you to replace headphone Jack, camera and charging port.
-
-
Pry back cover open with a medal spudger, or your fingernail, in the divot at the bottom left corner of the phone.
-
Lift open case by the corner nearest the divot and remove it from the phone.
-
-
-
Use the Plastic Opening tools to gently dislodge the two connection on the top and bottom right of the phone from the inside of the phone.
-
-
-
Using a plastic opening tool, begin to gently pry the motherboard, away from the display assembly.
-
The motherboard will freely remove.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
