Introduction

The wifi card is what lets you connect to the world wide web, and there are plenty of people who would find a computer without one to be absolutely useless. That’s why if there is ever a problem with it, it’s important to get it fixed, wifi troubles tend to be very annoying for most users such as when the computer’s connection is slow, or it can’t even recognize nearby networks. This guide will take you step by step on how to replace the Wifi Card of your ASUS Q405U

  1. BFD6o3ZDLETKyqVK
    • Using the Phillips #1 screwdriver, remove eleven (11) 1.5 mm screws from the back cover.

  2. WiOStdoZBxgfVQLR
    • Pull the back cover off of your laptop. Use a spudger to help pry it off of the device.

  3. ewHr2IHWfF5mH43v
    ewHr2IHWfF5mH43v
    WbYgUdZUQOTOKo6F
    XLsvqwBjR1YUnhBM
    • Disconnect the 4 wires attached from the keyboard side of laptop to the screen side of laptop by pulling them out of their sockets on one end (as shown in picture).

  4. nHC1HrfxRLHXxoM6
    nHC1HrfxRLHXxoM6
    hW14AmPvDkRROxLr
    • OPTIONAL: Additional pictures to demonstrate moving keyboard out of the way without detaching connections.

    • Lift the ribbon cable with gentle pressure, pry the ribbon away from the motherboard on the right side, then the left, then the center, prying away only a little triangle of tape at a time, applying gentle upward pressure to the tape while you loosen and pry.

    • Once you have enough slack in the three ribbons that hold the keyboard down too tightly, lift the front of the keyboard and twist counterclockwise to produce enough room to reach the screws securing the hard drive with your screwdriver.

  5. svRxDbYgok4Aby6r
    • Using the Phillips #1 screwdriver, remove the four 1.5 mm screws securing the battery to the device.

  6. UW5PLQisEN3bWRoC
    • Once all screws are removed, lift the battery out from the base of the computer.

  7. YQ1kAVL5kMJfMxS1
    • Using the Phillips #1 screwdriver, remove the 0.8 mm screw securing the Wi-Fi card to the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jeremiah Baselice

Member since: 25/10/21

569 Reputation

0 comments