Introduction
How to replace the A/C (pollen or cabin) filter on a 2005-2009 Subaru Outback
Tools
Parts
-
-
Remove all contents in the glove box.
-
Gently pry and pull out the dashboard panel located at the right side of the glove box.
-
-
-
Unscrew the screw that holds the pin on the right hinge of the glove box.
-
Disconnect the damper (string) locate on the right side of the glove box.
-
Push in the sides of the glove box to release the knock pins.
-
Remove the glove box by disengaging the left hinge.
-
-
-
Remove the 3 screws on the left side of the upper storage box.
-
Pull out the upper storage box.
-
-
-
Remove the screws to take out the bracket from hole where the storage box was removed.
-
Peel off Velcro tape attaching the insulator, and push up the insulator.
-
-
-
Press inward the four tabs on the filter housing and the filter tray out. You need to slide the tray below the upper storage support.
-
Replace the filter. The air flow arrow on the filter must point down.
-
To reassemble your device, follow these instructions in reverse order.
One comment
On right hand drive car only needed to take out glovebox lid and shelf!