Introduction

This will be a Fast Fix guide on how to fix the headlights for either side of a 2010 Honda Odyssey. This guide is to help you when your headlights may stop working for any reason. There are no Tools needed for this guide. The only thing you will need is a replacement light bulb.

  1. WlQ6xv3MVGjKIMGE
    • Pull the hood release lever to pop the hood.

  2. AZveAQQe3EsGbhBH
    AZveAQQe3EsGbhBH
    1n4MSHPaknkXsjUN
    MSBhyBAt1MJTZRPR
    • Pull the lever under the hood of the car, right above the Honda logo, to release the hood.

  3. nTLcyaVfugWQrsGE
    nTLcyaVfugWQrsGE
    sL3oMXUd4WubJs3B
    nDETOFW2e3UahWYP
    • Lift the hood strut and insert the end of the strut into the corresponding groove.

    • Ensure the hood is supported properly.

  4. LQNlf1eyOxXRCqwj
    LQNlf1eyOxXRCqwj
    JXDW6rLoSmooDqg1
    iWT1a1evgDxnFLOp
    • Determinethe headlight that you need to replace on either side of the vehicle.

  5. AS4IrYCkLK2MZYSM
    AS4IrYCkLK2MZYSM
    yfSeGohAyXqLYNSg
    ZwMBZYJSWg4RGK2b
    • Apply pressure on the flap and pull it down.

  6. mPdBxMyWADEqBbPu
    mPdBxMyWADEqBbPu
    yINw4jZnXastsR5G
    Pw2D2ncGK4GlZJiY
    • Turn the socket counterclockwise to release it from its housing.

    • Pull the bulb directly out of its socket.

  7. 2YiaLvRsKQahIeBk
    • Get a replacement bulb.

    • Take care not to touch the bulb with bare skin.

  8. MZVVLJVTvTmxaMam
    MZVVLJVTvTmxaMam
    YjicMM3UcvpxKFss
    hSNoxMGX44vAo6Xf
    • Put the bulb in, tighten the bulb, and reconnect the connector.

Conclusion

Now remove the hood mount and close the hood you should hear a loud sound when it is completely closed and it should be flush with the rest of the vehicle

Gursiman

Member since: 16/09/23

157 Reputation

0 comments