Buildah

Buildah is a tool that facilitates building Open Container Initiative (OCI) container images. The Buildah package provides a command line tool that can be used to:

  • create a working container, either from scratch or using an image as a starting point
  • create an image, either from a working container or via the instructions in a Dockerfile
  • images can be built in either the OCI image format or the traditional upstream docker image format
  • mount a working container's root filesystem for manipulation
  • unmount a working container's root filesystem
  • use the updated contents of a container's root filesystem as a filesystem layer to create a new image
  • delete a working container or an image
  • rename a local container

Related articles

The most widely known alternative for building containers is docker. Do note that Buildah does not run containers, for that you may want to consider podman.

Installation

Install the buildah and podman packages or, for the development version, the buildah-gitAUR package.

If you want to run as non-root user, also install fuse-overlayfs for better performance and storage space efficiency.

Configuration

Enable support to build unprivileged containers

Users wishing to use Buildah to build unprivileged containers need to complete additional setup steps before running podman for the first time.

Note: If you are building system dedicated for running unprivileged containers, follow the steps bellow before adding any user. This way you will not have to edit /etc/subuid and /etc/subgid: useradd will do that for you, you only need to run touch /etc/subgid and touch /etc/subuid as root.

Finally, create both and to contain the mapping to the containerized UID/GID pairs for each user who shall be able to run the containers. The example below is for the root user (and systemd system unit) and an example user :

/etc/subuid
buildah:100000:65536

If you did run podman before applying the changes above, you will get errors when trying to pull images as an unprivileged user. Run to fix it.

If everything went well then after logging out and logging back in should not result in error

Troubleshooting

WARN[0000] "/" is not a shared mount, this could cause issues or missing mounts with rootless containers

Buildah/Podman running as rootless expects the bind mount to be shared, check if it is set to private:

In this case see and set temporarily the mount as shared with:

# mount --make-shared /

To set it permanently, edit /etc/fstab and add the shared option to the desired mount and reboot. It will result in a entry like:

See also
This article is issued from Archlinux. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.